|
The throttle valve must not be
removed. |
Remove the throttle
position sensor.
|
Except when necessary for replacement, the
throttle position sensor must not be removed.
|
| 1. |
Check the throttle body for
cracks. |
| 2. |
Check for restriction in the vacuum port or
passage. |
| 3. |
Check for interference when moving the
accelerator cable.
| •
|
Throttle valve set screw is set by
the factory. Please do not adjust this
screw. |
| •
|
When the idle rpm is out of
specification, check the relevant sensors and their
input or output value
first. | | |
